Welcome to Synotherm

E-mail:
info@synotherm.cn

    Contact us

    Icy LI
    Email:icy@synotherm.cn
    Skype:lingflame
    Tel: +86 18670706222     Dan LIU
    Email:dan@synotherm.cn
    Skype:live:liudan_1
    Tel: +86 18670708666

Microwave HAMiLab-M1500

6 - 1 Prev | Next Play
1 / 6

    High temperature microwave sintering furnace

    1. Microwave heating.
    2. Temperature up to 1600 degree.
    3. Heating speed up to 50 degree per minute.
    4. No pollution to material.

    Description

    HAMiLab-M1500 is our 3rd generation high temperature microwave laboratory system. HAMiLab-M1500 is a sophisticated upgrade to traditional muffle furnaces, with the high level of accuracy, control, speed that are customary in Synotherm systems. Drying, binder burn-out, synthesis sintering of powder solid materials, metals, glass can be completed in this system in a 3-4 hour period.  HAMiLab-M1500 was designed to increase the productivity of solid state laboratories from one set of samples to 3-4 sets of samples per day, without having to continuously run the system during periods of inactivity.

    Application field:

    - Claiming / synthesis of powder or particle materials:

    - Electronic ceramic powders: barium titanate, barium-strontium titanate, strontium titanate, barium zirconate titanate;

    - Lithium ion battery anode materials: lithium cobaltoxide, lithium manganate;

    - Various colorants, glaze material, inorganic pastel;

    - Alumina, magnesium oxide, zinc oxide, manganese dioxide, manganous-manganicoxide, zirconia, ammonium metavanadate, vanadium pentoxide, titanium dioxide, zinc carbonate, manganese carbonate, aluminum hydroxide, magnesium hydroxide, lithium cobaltoxide, zinc ferrite, Tri-chromatic rare earth fluorescent powder (Red), cement.

    Synthesis / sintering of devices:

    - Electronic ceramics: Piezoresistive element, thermistor, piezoceramics, microwave medium ceramics;

    - Magnetic materials: hard magnetic, Ni-Zn, gyromagnet ferrites;

    - Honeycomb ceramics, daily-use ceramics glass ware;

    - Oxide ceramics refractory materials: alumina, zirconia, magnesium oxide other oxide composites;

    - Incineration, cremation, scaling loss experiments

    Technical specification:

    Technical specification

    Model

    HAMiLab-M1500

    Voltage

    AC 220 plus/minus 10V;  50Hz/60Hz,

    Rating power

    4.0KW

    Microwave output power

    0.2-1.40KW continuously variable

    Microwave frequency

    2.45GHz plus/minus 25MHz

    Max. sintering temperature

    1600 Celsius degree

    Temperature measuring way

    IR thermometer

    Temperature range

    250 Celsius degree -1650celsius degree.

    Temperature accuracy

    plus/minus 0.5%

    Atmosphere system

    air

    Max loading space

    100x100x40mm (LxWxH)

    Cooling

    Water, 0.8 - 1m3/h at pressure > 0.15MPa

    Cycle cooling water total hardness

    less than 60mg/L

    Protection Safety

    Anode over voltage, anode over current, anode power surpass, electromagnet watchdog, magnetron temperature, external interlock.

    Control System

    PLC (15 sections of temperature control), embedded system connected to laptop via USB, with data storage printing functions.

    Microwave Leakage

    < 2mW/cm2 (Safety standard < 5mW/cm2)

    System outside dimension

    750x750x660mm (LxWxH)

     


Synotherm Corporation © 2025. All Rights Reserved.
TOP