Synotherm Corporation © 2025. All Rights Reserved.
E-mail：
info@synotherm.cn
E-mail：
info@synotherm.cn
Brief Introduction
The model AMPS continuous microwave pusher is the third generation continuous furnace manufactured by SYNOTHERM.
It is a highly efficient completely automated system, which is mainly used in high-temperature sintering, high-temperature reactions, high-temperature heat treatment of ceramic parts, ceramic powder materials, PM parts, metal powder materials dielectric materials.
Technical specifications:
Specifications | |
Model | AMPS 0915T ~ 3615 T |
Floor Footprint | 2M 6M ~ 2M 18M |
Output Microwave Power | 9KW ~ 36 KW |
Microwave Frequency | 2450 ± 25MHz |
Working Voltage & Frequency | 380V±10V; 3 AC+N+GND; 50Hz |
Maximum Temperature | 1600oC |
Temperature Measurement Accuracy | 0.6% ± 1oC |
Power Control Accuracy | < ± 2% |
Temperature Measurement | Thermocouple |
Control System | PLC (18 sections of temperature control), embedded system connected to laptop via USB, with data storage printing functions. |
Control Panel Display | 10” touch-pad LCD or laptop |
Mode of Propulsion | Hydraulic or pneumatic draw stem |
Speedy of Propulsion | 5-40mm/min variable |
Atmosphere | Air, nitrogen, argon, inert gas, gas mixture, including reducing gases |
Protection Safety | Anode over voltage, anode over current, anode power surpass, electromagnet watchdog, magnetron temperature, external interlock. |
Microwave Leakage | < 3mW/cm2 (Safety standard < 5mW/cm2) |
Cooling | Water, 5 – 10 m3/h at pressure: 0.10MPa > P > 0.15MPa |